Home / Products & Service / Dredging Engineering Pipe System / HDPE Dredging Pipe / HDPE Dredging Pipe (Flared End Without Welding)
HDPE Dredging Pipe (Flared End Without Welding)
HDPE Dredging Pipe (Flared End Without Welding)

HDPE Dredging Pipe (Flared End Without Welding)

Share:

HDPE Dredging Pipe (Flared End Without Welding)

Specification

Inside   DiameterOutside   DiameterWorking   PressureThickness
mmmmMpabarmm
2002251.01012.5
2502801.2512.515
3003300.8815
3504001.01025
4505000.8825
5005600.8830
5506301.01040
6006801.01040
6507100.8830
7008001.01050
8009000.8850
90010000.8850

Properties

CharacteristicsRequirements
Specific Gravity, g/cm3,   20(C)0.941-0.965
Longitudinal Reversion, %, (110(C))<=3
Oxidation Induction Time, min,   (200(C))>=20
Extension Rate at Break,%>=350

Hydraulic Pressure Test:

1)20(C), Hoop Stress is 12.4Mpa, 100h

2)80(C), Hoop Stress is 5.5Mpa, 165h

3)80(C), Hoop Stress is 5.0Mpa, 1000h


No   Failure

No   Failure

No   Failure



HDPE dredging Pipe is most suitable for mud & sand delivery and discharge, the performance is as follows:

1. Light weight, saving time and improving efficiency. HDPE dredging pipes are only one-eighth of steel pipes. They adopt flanges and bolts for connection, installation and dismantlement, which mean they are convenient for transportation, repair and replacement.

2. Great flexibility, tensile strength and elasticity. HDPE dredging pipe doesn't break after internal and external force impact, it has great resistance of stormy waves. They could be bended to be a circle by 4-8 pieces in the water. If they are need to be connected on land, they can be connected directly as long as the concave-convex is within 30 degrees of area.

3. Excellent wear-resistance ability. HDPE dredging pipe’s wear-resistance ability is 4-8 times of steel pipe, together with its anti-UV and anti-aging ability, it normally can be used for 5-8 years upon sand content.

4. HDPE dredging pipe is assembled with two metal flanges at both pipe ends. The pipes are connected by flanges and bolts, which ensure they will not deform and drip when installing and disassembling and ensure the engineering’s high efficiency.

5. HDPE dredging Pipe has smooth outer and inner wall and tiny friction coefficient. Its transmission efficiency is 20% to 30% higher than steel pipe.

6. HDPE dredging Pipe’s workable temperature is range from – 40 ° c to 60 ° c, it can adapt to bad weather and fluctuated temperature.

7. Whenever on land or water, HDPE dredging Pipe’s total engineering cost is lower and more efficient than other pipes.


1. Delivering powder and coal ash in thermal power plant.
2. Delivering mine tailings and slurry, metallurgical mines in the mining industry.
3. Delivering pulverized coal and coal-water slurry of coal preparation plant in the coal industry.
4. Delivering mud and corrosive media with slag in the chemical industry.
5. Delivering crude oil and petroleum.
6. Delivering sand\mud\slurry for dredger in dredging projects or sand suction projects, and also for seawater treatment projects.